BPDLY - 7200-06, 5020/7020 DEVELOPER-SAVIN

  • MSDS: BPDLY
  • Manufacturer: RICOH CORP
  • Product Name: 7200-06, 5020/7020 DEVELOPER-SAVIN
  • National Stock Number: 6850-00N030036
Product Identification

Product ID:7200-06, 5020/7020 DEVELOPER-SAVIN
MSDS Date:07/10/1991
FSC:6850
NIIN:00N030036
MSDS Number: BPDLY

Responsible Party
RICOH CORPORATION
5 DEDRICK PLACE
WEST CALDWELL, NJ 07006
US

Emergency Phone: 800-336-6737

Info Phone: 201-882-2000;800-336-6737

Preparer: KRISTINA SAGE

Cage: 54726

Contractor
RICOH CORPORATION
WEST CALDWELL, NJ 07006-6304 US

Telephone: 800-336-6737

Cage: 54726

Ingredients

1); (FERRITE POWDER) PEL/TLV AS NI

CAS: 1313-99-1

RTECS: QR8400000

Fraction By Weight: < 97.0%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


ZINC OXIDE; (FERRIC POWDER)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: < 97.0%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


COPPER OXIDE; (FERRITE POWDER). PEL/TLV AS CU

CAS: 1317-38-0

RTECS: GL7900000

Fraction By Weight: < 97.0%

OSHA PEL 1MG/M3 DUST;0.1 FUME

ACGIH TLV: 1MG/M3 DUST;0.2 FUME


HEMATITE; (FERRITE POWDER) PEL/TLV AS FE

CAS: 1317-60-8

RTECS: MH7600000

Fraction By Weight: < 97.0%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3


STYRENE, ACRYLATE COPOLYMER; (STYRENE ACRYLIC POLYMER)

CAS: 25213-39-2

Fraction By Weight: < 03.0%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: < 03.0%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


DYE

CAS: 84170-66-8

Fraction By Weight: < 03.0%


DYE

CAS: 109125-50-0

Fraction By Weight: < 03.0%


DYE

CAS: 109125-51-1

Fraction By Weight: <03.0%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MAY CAUSE TEMPORARY EYE
DISCOMFORT. SKIN: MAY CAUSE SLIGHT IRRITATION ON PROLONGED AND
REPEATED CONTACT WITH SKIN. INHAL: GASPING. INGEST: GREATER THAN 5
G/KG BODYWEIGHT, PRACTICALLY NON- TOXIC. CHRONIC: NOT APPLICABLE.
Explanation of Carcinogenicity:NICKEL AND NICKEL COMPOUNDS: GROUP 1
(IARC), GROUP 2 (NTP).
Effects of Overexposure:SEE HEALTH HAZARDS.

First Aid

First Aid:EYES: TRY TO REMOVE OR FLUSH WITH EYE DROPS FOR AT LEAST 15
MIN. IF UNSUCCESSFUL, GET MEDICAL ATTN. SKIN: WASH THOROUGHLY WITH
SOAP AND WATER. INHAL: REMOVE FROM EXPOSURE. INGEST: DILUTE STOMACH
CONTE NTS WITH SEVERAL GLASSES OF WATER.

Fire Fighting

Extinguishing Media:CO2, DRY CHEMICALS, FOAM OR WATER.
Fire Fighting Procedures:NO SPECIAL FIRE-FIGHTING PROCEDURE IS
NECESSARY. WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WILL NOT OCCUR.

Accidental Release

Spill Release Procedures:SWEEP UP USING AN APPRVD TONER VACUUM CLEANER
W/A 0.5 MICRON FILTER SUCH AS ATRIX AAA TONER VACUUM CLEANER. USE
OF A VACUUM CLEANER NOT RATED FOR TONER PARTICULATE COULD BE A
POTENTIAL FIRE HAZ &/OR R SLT IN PERSONAL INJURY. REMOVE RESIDUE
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:CLEANSE SKIN THOROUGHLY AFTER CONTACT,
BEFORE BREAKS AND MEALS, AND AT THE END OF WORK PERIODS. KEEP OUT
OF REACH CHILDREN.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS OF USE.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST: NONE REQUIRED UNDER NORMAL CONDITIONS OF
USE. MECHANICAL (GENERAL): ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL CONDITIONS OF
USE.
Work Hygienic Practices:CLEANSE SKIN THOROUGHLY AFTER CONTACT, BEFORE
BREAKS AND MEALS, AND AT THE END OF WORK PERIODS.
Supplemental Safety and Health
SPILL PROC: WITH SOAP AND WATER.

Chemical Properties

HCC:T6
Melt/Freeze Pt:M.P/F.P Text:>176F,>80C
Spec Gravity:1.97
Solubility in Water:NEGLIGIBLE; <0.1%
Appearance and Odor:BLACK POWDER, WITH SLIGHT PLASTIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO AND OTHER DECOMPOSITION PRODUCTS IN
THE CASE OF COMBUSTION.

Disposal

Waste Disposal Methods:USED DEVELOPER SHOULD BE DISP OF IN AN ENVIRON
SAFE MANNER & I/A/W LOC, STATE & FED GOVTL REGS. DISP REGS VARY
FROM LOCALITY TO LOCALITY, THEREFORE, CONSULT W/YOUR LOC OFFICE OF
EPA TO DETERMINE PROPE R METH OF DISP. DO NOT INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.